Taro® Special HT LS

Marine Engine Oil

Taro® Special HT LS

Taro® Special HT LS 40 is a high-performance 40 BN SAE 50 cylinder lubricant particularly intended for cylinder lubrication of the latest generation crosshead engines using low sulphur fuel (<1.5 to 2 wt% sulphur) and operating at very high mechanical and thermal loads reaching up to 160 bar in maximum cylinder pressure and up to 270 degrees Celsius in liner temperature at top dead centre.

Suitable Applications
  • Wear Protection
    Ensures protection against excessive cylinder liner and piston ring wear. The sulphur in marine fuels forms corrosive acidic products during combustion, even when its level is low. These acidic products not only attack engine parts like cylinder liners and piston rings, but also impair lubricating qualities of the oil. The base in Taro Special HT LS 40, provided by the alkaline additives, neutralizes the acidic products, thereby reducing wear and extending cylinder liner and piston ring life, thus allowing prolonged service intervals.
  • Detergent/Dispersant Properties
    Prevents ring sticking and minimizes deposit formation throughout the combustion chamber areas. This means extended maintenance intervals, and trouble-free operation with reduced maintenance costs.
  • Excellent Lubrication Properties
    Maintains an oil fi lm under severe, high load conditions, thereby reducing frictional wear and preventing scuffing of liners, pistons and rings.
  • Taro® Special HT LS 40 is a high-performance 40 BN SAE 50 cylinder lubricant particularly intended for cylinder lubrication of the latest generation crosshead engines using low sulphur fuel (<1.5 to 2 wt% sulphur) and operating at very high mechanical and thermal loads reaching up to 160 bar in maximum cylinder pressure and up to 270 degrees Celsius in liner temperature at top dead centre.
  • Taro® Special HT LS 40 is blended from highly refined, paraffinic base oils and carefully selected additives to provide superior ring and liner wear protection and excellent piston cleanliness in low-speed crosshead engines.
  • Taro® Special HT LS 40 has been developed specifically for high-pressure and hightemperature applications
Taro Special HT LS 40 is recommended for the cylinder lubrication of all crossheadtype marine diesel engines continuously using low sulphur fuel and operating at high specific power outputs and high thermal loads. Running on low sulphur fuel requires the reduction of base introduced into the cylinder. This can be achieved by optimizing the oil feed rate or selecting a diesel cylinder lubricant with a lower base number. Taro Special HT LS 40 has been approved by MAN B&W and Wärtsilä for use in the latest generation engine designs.
Interested in optimising your business with Caltex?


Share this page